KUBOTA EXCAVATORS - K SERIES
Kubota’s compact excavators combine maneuverability, power and reliability with economy to help you haul away more pay dirt on every job. These machines have earned high market acclaim for outstanding utility and exceptional, efficient operation.
SPECIFICATIONS
KEY FEATURES
Key Features:
- Clean-running Kubota Engine (Tier IV)
- Variable-width Undercarriage, Fits Through Doorways
- Two Speed Travel
- Foldable ROPS Frame
Clean-Running Kubota Engine:
Powerful and dependable, the K008-3’s diesel engine delivers superior horsepower and performance. It offers low noise and vibration levels, exceptional fuel efficiency, and complies with the EPA’s 2013 Tier IV emissions regulations.
TPSS:
TPSS is standard equipment, allowing the operator to select the most familiar operating control pattern, either ISO or SAE.
Handy Toolbox:
To help you perform basic maintenance, the K008-3 comes complete with a toolbox conveniently located under the operator’s seat.
Straight Wall Trenching:
Equipped with a swing angle of up to 60 degrees, the K008-3 lets you dig a straight trench along any wall.
Coolant Temperature Gauge:
The new coolant temperature gauge helps prevent the engine from overheating by keeping you informed. Located close to the control levers, a warning lamp lights up when the coolant temperature rises
to 115 degrees, and turns off when it falls to 108 degrees or below.
Improved Hose and Boom Cylinder Protection:
All the hydraulic hoses hidden with in the boom and dipper arm. With the boom mounted on top of the boom, the K008-3 increases service life by offering outstanding protection from damage.
Foldable ROPS:
Rollover Protective Structure provides you with an extra measure of safety. It folds down to make easier transporting and storage of the excavator.
Protected Bucket Hoses:
By running inside the dipper arm, the bucket hoses are also well protected from damage.
Protected Auxiliary Hoses:
By routing its auxiliary hydraulic hoses through the boom, the K008-3 no longer requires lengthy hoses when connecting your implements. Furthermore, a shorter hose length greatly reduces the risk of snagging and causing damage.
Two-Speed Travel
Need to make up time? Step on the K008-3’s hi-speed pedal, and you’ll maneuver around job sites faster than any other compact excavator in its class.
Two-Way Lever:
Located within easy reach, it lets you switch between control of the blade or the adjustable track width.
Fast and Easy Maintenance:
A full-open bonnet and new engine layout makes daily inspection and maintenance of essential components a snap. Both features now provide you with easy access to the radiator, battery, coolant, fuel filter, and dual-element air-cleaner.
Comfortable Operator’s Seat:
Well padded and contoured, you’ll truly appreciate the comfort of its operator’s seat, especially during long days of operation.
Swing Bracket Pin Bushings:
To increase life of components, swing bracket pins have bushings.
Spacious Operator’s Area:
You’ll find it more comfortable behind the operating levers of the K008-3. That’s because we’ve generously increased the space between the operating levers and the operator’s seat, and lengthened the floorboards.
Pedal-Operated Boom Swing:
A convenient toe-heel pedal lets you easily operate both the boom swing and upper-house swivel at the same time.
Wider Working Range:
For maximum productivity, its digging/dumping heights, digging depths, and digging radius at ground level have all been increased.
Adjustable Width Track Frame:
To enable passage through narrow spaces such as doorways and gates, the adjustable width track frame can reduce the K008-3’s track width down to 2’4”(700 mm) by simply operating a single lever. Plus, changing the blade width is as easy as removing one pin by hand.
Operating Weight (lbs): 2,200
- Clean-running Kubota Engine (Tier IV)
- Variable-width Undercarriage, Fits Through Doorways
- Two Speed Travel
- Foldable ROPS Frame
Clean-Running Kubota Engine:
Powerful and dependable, the K008-3’s diesel engine delivers superior horsepower and performance. It offers low noise and vibration levels, exceptional fuel efficiency, and complies with the EPA’s 2013 Tier IV emissions regulations.
TPSS:
TPSS is standard equipment, allowing the operator to select the most familiar operating control pattern, either ISO or SAE.
Handy Toolbox:
To help you perform basic maintenance, the K008-3 comes complete with a toolbox conveniently located under the operator’s seat.
Straight Wall Trenching:
Equipped with a swing angle of up to 60 degrees, the K008-3 lets you dig a straight trench along any wall.
Coolant Temperature Gauge:
The new coolant temperature gauge helps prevent the engine from overheating by keeping you informed. Located close to the control levers, a warning lamp lights up when the coolant temperature rises
to 115 degrees, and turns off when it falls to 108 degrees or below.
Improved Hose and Boom Cylinder Protection:
All the hydraulic hoses hidden with in the boom and dipper arm. With the boom mounted on top of the boom, the K008-3 increases service life by offering outstanding protection from damage.
Foldable ROPS:
Rollover Protective Structure provides you with an extra measure of safety. It folds down to make easier transporting and storage of the excavator.
Protected Bucket Hoses:
By running inside the dipper arm, the bucket hoses are also well protected from damage.
Protected Auxiliary Hoses:
By routing its auxiliary hydraulic hoses through the boom, the K008-3 no longer requires lengthy hoses when connecting your implements. Furthermore, a shorter hose length greatly reduces the risk of snagging and causing damage.
Two-Speed Travel
Need to make up time? Step on the K008-3’s hi-speed pedal, and you’ll maneuver around job sites faster than any other compact excavator in its class.
Two-Way Lever:
Located within easy reach, it lets you switch between control of the blade or the adjustable track width.
Fast and Easy Maintenance:
A full-open bonnet and new engine layout makes daily inspection and maintenance of essential components a snap. Both features now provide you with easy access to the radiator, battery, coolant, fuel filter, and dual-element air-cleaner.
Comfortable Operator’s Seat:
Well padded and contoured, you’ll truly appreciate the comfort of its operator’s seat, especially during long days of operation.
Swing Bracket Pin Bushings:
To increase life of components, swing bracket pins have bushings.
Spacious Operator’s Area:
You’ll find it more comfortable behind the operating levers of the K008-3. That’s because we’ve generously increased the space between the operating levers and the operator’s seat, and lengthened the floorboards.
Pedal-Operated Boom Swing:
A convenient toe-heel pedal lets you easily operate both the boom swing and upper-house swivel at the same time.
Wider Working Range:
For maximum productivity, its digging/dumping heights, digging depths, and digging radius at ground level have all been increased.
Adjustable Width Track Frame:
To enable passage through narrow spaces such as doorways and gates, the adjustable width track frame can reduce the K008-3’s track width down to 2’4”(700 mm) by simply operating a single lever. Plus, changing the blade width is as easy as removing one pin by hand.
Operating Weight (lbs): 2,200
Kubota’s KX018-4 mini excavator raises the standard in the 1.5-2.0 ton category with a powerful digging force and a wider working range than rival higher-end excavators. And with enhanced accessibility to sites such as roadsides or residential areas, the KX018-4 gets the jobs done easier from large construction areas to the tightest of places.
Key Features:
- Enhanced Digging Force
- Extraordinary Stability and Lifting Capacity
- Variable Track Gauge
- Auto-shift
- New Spacious Cab
- New Digital Panel
- Easy Cab Entry and Exit
- Engine Maintenance
Enhanced Digging Force:
The KX018-4 delivers an impressive bucket digging force. Its powerful and well-balanced arm and bucket allow the operator to dig faster and more efficiently even in the toughest conditions.
Extraordinary Stability and Lifting Capacity:
The KX018-4’s superior stability is due to its long tumbler distance and wide variable track width. It enables you to safely perform jobs using a host of Kubota attachments. And Kubota’s unique hydraulic system, together with a powerful boom cylinder, delivers the lifting power you need to broaden your range of lifting jobs. Combined, you get an advanced hydraulic system that automatically regulates and distributes the optimum amount of oil to each cylinder, based on the weight of the load for smooth, responsive and stable lifting capacity and overall operation.
Kubota Original Engine:
The KX018-4 is powered by Kubota’s impressive D902 16.1 HP engine. Engineered with the power to maximize digging and lifting performance. It also delivers minimized noise and vibration, and meets the latest engine emission regulation.
Short-pitched Rubber Crawler and Double Flanged Track Rollers:
The KX018-4 features a short-pitched rubber crawler that minimizes vibration and double flanged rollers that help improve stability and 3'3.0" travel performance.
Wide Working Range:
The KX018-4’s working range is always hard at work for you. You get powerful and responsive working applications that are ideal for digging, lifting and loading. Plus, you’ll get increased efficiency of our bucket capacity, digging depth and load over height, meeting or exceeding the latest requirements of today’s construction sites.
ROPS/OPG (Top Guard, level I) Certified Cabin/- Canopy:
Lightweight for improved stability and certified for safety, the KX018-4’s ROPS/OPG (Top Guard, level I) safety systems provide protection from falling debris or accidental rollovers.
Straight Travel:
For added safety, Kubota's hydraulic system makes sure that you travel in a straight line even during simultaneous operation of the front boom, arm and bucket.
Variable Track Gauge:
To optimize stability when using heavy attachments, the KX018-4 tracks can be expanded to a maximum of 4'3.2" and retracted to 3'3.0" to make passing through narrow doorways and tight work possible. Either adjustment can be made in just seconds by operating the independent track gauge lever.
Auto-shift:
The auto-shift system enables automatic travel shift from high to low depending on traction effort and terrain. This gives smoother operations when dozing and turning.
New Spacious Cab:
Designed for greater comfort, the new large cab with a fully flat floor provides more legroom to minimize fatigue.
New Digital Panel:
Following the excellence of Kubota’s Intelligent Control System, the new digital panel puts convenience at the operator’s fingertips. The user-friendly digital panel is positioned to the front right corner of the operator for better visibility, and features one-touch button operation to view the time, hour meter and tachometer. Warning lamps with code numbers on the display will alert you in case of emergencies such as overheating, hydraulic problems or low battery. With easier access, simpler settings, easy-to-read indicators and alerts, you’ll always be aware of the excavator’s functioning status.
Easy-open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX018-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Easy Cab Entry and Exit:
The wide cab entrance allows quick access to and from the cab making operations that require frequent exiting, such as trenching and piping, much easier.
TPSS:
The Two-Pattern Selection System positioned under the seat allows the operator to shift control styles conveniently while seated. A simple turn of a switch is all it takes to select between the ISO pattern and the SAE backhoe pattern.
Engine Maintenance:
Kubota has made routine maintenance extremely simple by consolidating primary engine components onto one side for easier access. Engine and other vital components can be inspected quickly and
easily.
Key Features:
- Enhanced Digging Force
- Extraordinary Stability and Lifting Capacity
- Variable Track Gauge
- Auto-shift
- New Spacious Cab
- New Digital Panel
- Easy Cab Entry and Exit
- Engine Maintenance
Enhanced Digging Force:
The KX018-4 delivers an impressive bucket digging force. Its powerful and well-balanced arm and bucket allow the operator to dig faster and more efficiently even in the toughest conditions.
Extraordinary Stability and Lifting Capacity:
The KX018-4’s superior stability is due to its long tumbler distance and wide variable track width. It enables you to safely perform jobs using a host of Kubota attachments. And Kubota’s unique hydraulic system, together with a powerful boom cylinder, delivers the lifting power you need to broaden your range of lifting jobs. Combined, you get an advanced hydraulic system that automatically regulates and distributes the optimum amount of oil to each cylinder, based on the weight of the load for smooth, responsive and stable lifting capacity and overall operation.
Kubota Original Engine:
The KX018-4 is powered by Kubota’s impressive D902 16.1 HP engine. Engineered with the power to maximize digging and lifting performance. It also delivers minimized noise and vibration, and meets the latest engine emission regulation.
Short-pitched Rubber Crawler and Double Flanged Track Rollers:
The KX018-4 features a short-pitched rubber crawler that minimizes vibration and double flanged rollers that help improve stability and 3'3.0" travel performance.
Wide Working Range:
The KX018-4’s working range is always hard at work for you. You get powerful and responsive working applications that are ideal for digging, lifting and loading. Plus, you’ll get increased efficiency of our bucket capacity, digging depth and load over height, meeting or exceeding the latest requirements of today’s construction sites.
ROPS/OPG (Top Guard, level I) Certified Cabin/- Canopy:
Lightweight for improved stability and certified for safety, the KX018-4’s ROPS/OPG (Top Guard, level I) safety systems provide protection from falling debris or accidental rollovers.
Straight Travel:
For added safety, Kubota's hydraulic system makes sure that you travel in a straight line even during simultaneous operation of the front boom, arm and bucket.
Variable Track Gauge:
To optimize stability when using heavy attachments, the KX018-4 tracks can be expanded to a maximum of 4'3.2" and retracted to 3'3.0" to make passing through narrow doorways and tight work possible. Either adjustment can be made in just seconds by operating the independent track gauge lever.
Auto-shift:
The auto-shift system enables automatic travel shift from high to low depending on traction effort and terrain. This gives smoother operations when dozing and turning.
New Spacious Cab:
Designed for greater comfort, the new large cab with a fully flat floor provides more legroom to minimize fatigue.
New Digital Panel:
Following the excellence of Kubota’s Intelligent Control System, the new digital panel puts convenience at the operator’s fingertips. The user-friendly digital panel is positioned to the front right corner of the operator for better visibility, and features one-touch button operation to view the time, hour meter and tachometer. Warning lamps with code numbers on the display will alert you in case of emergencies such as overheating, hydraulic problems or low battery. With easier access, simpler settings, easy-to-read indicators and alerts, you’ll always be aware of the excavator’s functioning status.
Easy-open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX018-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Easy Cab Entry and Exit:
The wide cab entrance allows quick access to and from the cab making operations that require frequent exiting, such as trenching and piping, much easier.
TPSS:
The Two-Pattern Selection System positioned under the seat allows the operator to shift control styles conveniently while seated. A simple turn of a switch is all it takes to select between the ISO pattern and the SAE backhoe pattern.
Engine Maintenance:
Kubota has made routine maintenance extremely simple by consolidating primary engine components onto one side for easier access. Engine and other vital components can be inspected quickly and
easily.
When outstanding maneuverability, operational performance, operator comfort, ease of servicing, durability and reliability are the deciding factors, the KX71-3S compact excavator is the answer. Packed with a host of features that deliver efficient and reliable performance, the advantage is yours when you're taking care of business with the KX71-3S excavator. The Kubota KX71-3S – it's stronger to make your professional excavating jobs easier.
Key Features:
- Clean-running Kubota Engine (Tier IV)
- Adjustable Max. Oil Flow on Auxiliary Circuit
- Strong Bucket Breakout Force
- Easy Maintenance
- Thumb Bracket and Relief Valve as Standard
Clean-running Kubota Engine (Tier IV):
Powerful and dependable, the KX71-3S’s diesel engine delivers superior horsepower and performance. It offers low noise and vibration levels, exceptional fuel efficiency, and complies with Tier IV emissions regulations.
Spacious Operating Area with Deluxe Suspension Seat:
More spacious than standard tail-swing excavators, the KX71-3S’s comfortable operating area helps reduce operator fatigue. The highback deluxe suspension seat is equipped with wrist rests. Moreover, the height and spring firmness are adjustable, ensuring optimum comfort for every operator.
Convenient Two-pattern Selection System (TPSS):
Change between ISO and SAE operating patterns with a quick flip of theTPSS switch, without tools or leaving your seat.
Wide Working Range:
The KX71-3S’s powerful and responsive front working group can handle all your digging, lifting, and loading jobs. Its large bucket capacity, long reach, and formidable digging depth meet or exceed most all job requirements on the construction site.
Strong Bucket Breakout:
Even when heavily loaded, the KX71-3S won’t slow down, thanks to its powerful breakout force. With the pin-on or quick coupler bucket, the bucket breakout force is more than enough for even the toughest excavating jobs.
Adjustable Maximum Oil Flow Control for Auxiliary Port:
The digital instrument panel lets you control the oil flow according to your needs or the attachment in use. It eliminates the hassle of using tools to change settings manually, so you don’t have to leave the cabin. When using a tilt bucket, you can slow the flow to get just the right control to gently shape a swale. Alternatively, for a brush cutter, direct the oil flow to one side of the excavator arm. The system will even store your settings for the next time you need it, saving time and quickly regulating the flow requirements. Adjustable oil flow enhances performance and saves fuel.
Thumb Bracket:
The factory-installed thumb bracket and relief valve significantly reduce the time needed to mount the optional hydraulic thumb.
Digital Panel:
A digital panel and the Kubota Intelligent Control System (KICS) help reduce excavator downtime and repair fees by providing accurate and timely diagnostic readings and routine maintenance alerts. The panel not only lets you know when fuel is running low, but warns you during refueling when the tank is nearly full.
Key Features:
- Clean-running Kubota Engine (Tier IV)
- Adjustable Max. Oil Flow on Auxiliary Circuit
- Strong Bucket Breakout Force
- Easy Maintenance
- Thumb Bracket and Relief Valve as Standard
Clean-running Kubota Engine (Tier IV):
Powerful and dependable, the KX71-3S’s diesel engine delivers superior horsepower and performance. It offers low noise and vibration levels, exceptional fuel efficiency, and complies with Tier IV emissions regulations.
Spacious Operating Area with Deluxe Suspension Seat:
More spacious than standard tail-swing excavators, the KX71-3S’s comfortable operating area helps reduce operator fatigue. The highback deluxe suspension seat is equipped with wrist rests. Moreover, the height and spring firmness are adjustable, ensuring optimum comfort for every operator.
Convenient Two-pattern Selection System (TPSS):
Change between ISO and SAE operating patterns with a quick flip of theTPSS switch, without tools or leaving your seat.
Wide Working Range:
The KX71-3S’s powerful and responsive front working group can handle all your digging, lifting, and loading jobs. Its large bucket capacity, long reach, and formidable digging depth meet or exceed most all job requirements on the construction site.
Strong Bucket Breakout:
Even when heavily loaded, the KX71-3S won’t slow down, thanks to its powerful breakout force. With the pin-on or quick coupler bucket, the bucket breakout force is more than enough for even the toughest excavating jobs.
Adjustable Maximum Oil Flow Control for Auxiliary Port:
The digital instrument panel lets you control the oil flow according to your needs or the attachment in use. It eliminates the hassle of using tools to change settings manually, so you don’t have to leave the cabin. When using a tilt bucket, you can slow the flow to get just the right control to gently shape a swale. Alternatively, for a brush cutter, direct the oil flow to one side of the excavator arm. The system will even store your settings for the next time you need it, saving time and quickly regulating the flow requirements. Adjustable oil flow enhances performance and saves fuel.
Thumb Bracket:
The factory-installed thumb bracket and relief valve significantly reduce the time needed to mount the optional hydraulic thumb.
Digital Panel:
A digital panel and the Kubota Intelligent Control System (KICS) help reduce excavator downtime and repair fees by providing accurate and timely diagnostic readings and routine maintenance alerts. The panel not only lets you know when fuel is running low, but warns you during refueling when the tank is nearly full.
Key Features:
Aux1 Diverter Valve:
The diverter valve allows auxiliary oil to be diverted to the operation of auxiliary attachments without removal of the thumb attachment pipeline for increased efficiency on the go.
Strong Bucket Breakout Force:
When heavily loaded, the KX033-4's outstanding bucket breakout force lets you handle even the toughest excavating jobs with speed and efficiency.
Wide Working Range:
The KX033-4's powerful and responsive front working group gives you the confidence to handle a wide range of digging, lifting, and loading jobs. The low center of gravity with the double flanged track rollers provide efficient operation when working to the side or lifting heavy objects.
Easy-Open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX033-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Wider Entrance:
The KX033-4 features a much wider door and more ample foot space, making it a breeze to get on and off the excavator.
Deluxe Suspension Seat:
Kubota's high back suspension seat has been designed for maximum operator comfort and to minimize fatigue during extended machine operation. The deluxe reclining seat offers weight compensation, firm adjustable wrist support and retractable seat belts.
Air Conditioning:
Enhanced air circulation in the cab results from a more powerful cooling/heating unit and six vents positioned around the operator to offer optimal all weather comfort.
TPSS:
Operators can select the ISO pattern or SAE backhoe pattern by turning a switch positioned within easy reach while seated.
Kubota Original Direct Injection Engine:
The KX033-4 is powered by Kubota's impressive direct injection engine. Engineered with the power to maximize digging and lifting performance, it also delivers minimized noise, vibration and fuel consumption, and is as well a non-DOC/DPF Tier 4 Final certified engine.
Proportional Flow Control of Auxiliary Circuit (AUX1) and Maximum Oil Flow Setting:
Now you can conveniently program up to five different oil flow rates for specific attachments on the new digital control panel. No tools or manual adjustment is required. And, with a maximum AUX 1 circuit oil flow now up to 15.8 GPM (60 liters) you can operate a larger variety of auxiliary attachments than ever before.
Aux1 Diverter Valve:
The diverter valve allows auxiliary oil to be diverted to the operation of auxiliary attachments without removal of the thumb attachment pipeline for increased efficiency on the go.
Strong Bucket Breakout Force:
When heavily loaded, the KX033-4's outstanding bucket breakout force lets you handle even the toughest excavating jobs with speed and efficiency.
Wide Working Range:
The KX033-4's powerful and responsive front working group gives you the confidence to handle a wide range of digging, lifting, and loading jobs. The low center of gravity with the double flanged track rollers provide efficient operation when working to the side or lifting heavy objects.
Easy-Open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX033-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Wider Entrance:
The KX033-4 features a much wider door and more ample foot space, making it a breeze to get on and off the excavator.
Deluxe Suspension Seat:
Kubota's high back suspension seat has been designed for maximum operator comfort and to minimize fatigue during extended machine operation. The deluxe reclining seat offers weight compensation, firm adjustable wrist support and retractable seat belts.
Air Conditioning:
Enhanced air circulation in the cab results from a more powerful cooling/heating unit and six vents positioned around the operator to offer optimal all weather comfort.
TPSS:
Operators can select the ISO pattern or SAE backhoe pattern by turning a switch positioned within easy reach while seated.
Kubota Original Direct Injection Engine:
The KX033-4 is powered by Kubota's impressive direct injection engine. Engineered with the power to maximize digging and lifting performance, it also delivers minimized noise, vibration and fuel consumption, and is as well a non-DOC/DPF Tier 4 Final certified engine.
Proportional Flow Control of Auxiliary Circuit (AUX1) and Maximum Oil Flow Setting:
Now you can conveniently program up to five different oil flow rates for specific attachments on the new digital control panel. No tools or manual adjustment is required. And, with a maximum AUX 1 circuit oil flow now up to 15.8 GPM (60 liters) you can operate a larger variety of auxiliary attachments than ever before.
The KX040-4 has the power and versatility to take on almost any task even in the toughest conditions. Combined with improved digging and lifting power, and smoother travel performance, it can get the job done right!
Key Features:
Common Rail System and Diesel Particulate Filter (DPF) Muffler:
The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion. The results are greater efficiency, better fuel economy and less engine noise. Its combination with the Exhaust Gas Recirculation (EGR) and Diesel Particulate Filter (DPF) Muffler reduces harmful emissions to make the KX040-4 Tier IV-compliant.
Automatic Regeneration System:
Kubota’s original automatic regeneration system automatically burns accumulated particulate matter (soot) in the DPF muffler to keep the muffler clean for longer operation. For safety reasons, automatic regeneration can be turned off with the inhibit switch when the excavator is operating in areas that are prone to fires.
Introducing ECO PLUS®:
Kubota’s original ECO PLUS® prioritizes fuel economy, and supports the environment. For tough digging applications, use Standard Mode and experience a 3% productivity improvement over the prior model and use less fuel, up to 12% less.
Spacious Cab:
Designed for greater comfort, the large cab with a fully flat floor provides more legroom to minimize fatigue.
Easy-open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX040-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Wider Entrance:
The KX040-4’s larger cab provides a much wider door and more ample foot space, to make getting on and off the excavator a breeze.
Deluxe Suspension Seat:
Kubota’s high-back suspension seat has been designed for maximum operator comfort and to minimize fatigue during extended machine operation. The deluxe reclining seat offers weight compensation, firm adjustable wrist support and retractable seat belts.
Fully Flat Floor:
For added comfort, the cabin floor is completely flat for greater legroom and a more spacious feel.
Proportional Flow Control of Auxiliary Circuit (AUX1/2) and Maximum Oil Flow Setting:
The KX040-4 is available with a standard AUX1 and optional AUX2 auxiliary circuits. The convenient thumb-operated switch on the lever allows easy proportional flow control of the auxiliary circuit, while a forefinger-operated on/off switch enables simple operation of special applications that require a constant oil flow. The maximum oil flow setting is conveniently adjustable from the digital panel. Up to five flow rates corresponding to specific attachments can be programmed in the memory on the digital panel for easy retrieval for the next job.
AUX1 Diverter Valve:
With the AUX1 diverter valve, the AUX oil supply can be changed without having to remove the thumb pipeline when the operator wants to use a hydraulic attachment.
Strong Bucket Breakout:
Even when heavily loaded, the KX040-4 won’t slow down, thanks to its powerful breakout force. With the pin-on or quick coupler bucket, the bucket breakout force is more than enough for even the toughest excavating jobs.
Auto Down Shift:
The Auto down shift system enables automatic travel shift from high to low depending on traction effort and terrain. This gives smoother simultaneous operations when dozing and turning.
Auto Idling System:
Save fuel with Kubota’s Auto Idle. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs.
Thumb Bracket and Relief Valves:
The hydraulic thumb makes short work of a variety of loading and material handling jobs. The factory installed mount brackets and hydraulics significantly reduce the time needed to mount accessories.
Hydraulic Angle Blade:
Save time and work more efficiently. With a simple movement of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when back filling trenches.
Hydraulic 6-in-1 Blade:
Kubota's hydraulic 6-in-1 Blade can be angled right and left, and now, tilted as well. This blade enables six different positions: neutral, float-up, left-end-up, right-end-up, left-end-forward and right-end-forward. This feature makes leveling and back filling work incredibly easy, even on inclines and uneven terrain, making you more productive and more efficient.
Key Features:
Common Rail System and Diesel Particulate Filter (DPF) Muffler:
The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion. The results are greater efficiency, better fuel economy and less engine noise. Its combination with the Exhaust Gas Recirculation (EGR) and Diesel Particulate Filter (DPF) Muffler reduces harmful emissions to make the KX040-4 Tier IV-compliant.
Automatic Regeneration System:
Kubota’s original automatic regeneration system automatically burns accumulated particulate matter (soot) in the DPF muffler to keep the muffler clean for longer operation. For safety reasons, automatic regeneration can be turned off with the inhibit switch when the excavator is operating in areas that are prone to fires.
Introducing ECO PLUS®:
Kubota’s original ECO PLUS® prioritizes fuel economy, and supports the environment. For tough digging applications, use Standard Mode and experience a 3% productivity improvement over the prior model and use less fuel, up to 12% less.
Spacious Cab:
Designed for greater comfort, the large cab with a fully flat floor provides more legroom to minimize fatigue.
Easy-open Front Slide Window:
Unlike many excavator windows, the front glass window of the KX040-4 opens with ease. Just flip the latches on the window sides and slide it up. A gas-assist mechanism makes this action almost effortless.
Wider Entrance:
The KX040-4’s larger cab provides a much wider door and more ample foot space, to make getting on and off the excavator a breeze.
Deluxe Suspension Seat:
Kubota’s high-back suspension seat has been designed for maximum operator comfort and to minimize fatigue during extended machine operation. The deluxe reclining seat offers weight compensation, firm adjustable wrist support and retractable seat belts.
Fully Flat Floor:
For added comfort, the cabin floor is completely flat for greater legroom and a more spacious feel.
Proportional Flow Control of Auxiliary Circuit (AUX1/2) and Maximum Oil Flow Setting:
The KX040-4 is available with a standard AUX1 and optional AUX2 auxiliary circuits. The convenient thumb-operated switch on the lever allows easy proportional flow control of the auxiliary circuit, while a forefinger-operated on/off switch enables simple operation of special applications that require a constant oil flow. The maximum oil flow setting is conveniently adjustable from the digital panel. Up to five flow rates corresponding to specific attachments can be programmed in the memory on the digital panel for easy retrieval for the next job.
AUX1 Diverter Valve:
With the AUX1 diverter valve, the AUX oil supply can be changed without having to remove the thumb pipeline when the operator wants to use a hydraulic attachment.
Strong Bucket Breakout:
Even when heavily loaded, the KX040-4 won’t slow down, thanks to its powerful breakout force. With the pin-on or quick coupler bucket, the bucket breakout force is more than enough for even the toughest excavating jobs.
Auto Down Shift:
The Auto down shift system enables automatic travel shift from high to low depending on traction effort and terrain. This gives smoother simultaneous operations when dozing and turning.
Auto Idling System:
Save fuel with Kubota’s Auto Idle. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs.
Thumb Bracket and Relief Valves:
The hydraulic thumb makes short work of a variety of loading and material handling jobs. The factory installed mount brackets and hydraulics significantly reduce the time needed to mount accessories.
Hydraulic Angle Blade:
Save time and work more efficiently. With a simple movement of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when back filling trenches.
Hydraulic 6-in-1 Blade:
Kubota's hydraulic 6-in-1 Blade can be angled right and left, and now, tilted as well. This blade enables six different positions: neutral, float-up, left-end-up, right-end-up, left-end-forward and right-end-forward. This feature makes leveling and back filling work incredibly easy, even on inclines and uneven terrain, making you more productive and more efficient.
Combining the power for demanding jobs and the versatility to work in any condition, the Kubota KX057-4 is ready to take on most challenges. It’s designed with excellent stability to work with a variety of attachments. Versatility is greatly enhanced with precise oil flow control for auxiliary circuits. With upgraded digging and lifting power, smoother travel performance and improved versatility, this Kubota truly has what you need to get the job done well.
Key Features:
Kubota V2607-DI Engine:
The KX057-4 is powered by Kubota's impressive 47.6 HP direct injection engine. Engineered with the power to maximize digging and lifting performance, it also delivers minimized noise, vibration and fuel consumption.
Hydraulic Angle Blade (Option):
Save time and work more efficiently. With a simple movement of a rocker switch on top of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when backfilling trenches.
Auxiliary Circuit 1 (Standard Equipment):
Controlled by the right-hand joystick. AUX1 supplies 19.8 gpm to operate attachments requiring hydraulic flow, like a breaker, thumb, or tilt bucket.
AUX1 Diverter Valve:
With the AUX1 diverter valve, the AUX oil supply can be changed without having to remove the thumb pipeline when the operator wants to use a hydraulic attachment.
Auxiliary Circuit 2 (Optional):
With AUX2 installed the left-hand joystick supplies 19.8 gpm to operate attachment like a breaker, auger or tilt bucket. The right-hand joystick supplies 9.8 gpm to operate the hydraulic thumb.
Adjustable Maximum Oil Flow Control:
The maximum oil flow settings of both circuits are conveniently adjustable from the digital panel . No additional tools or complex manual adjusting procedures are necessary. You can even program up to five oil flow rates corresponding to specific attachments into memory on the digital panel.
Stronger Bucket and Arm Breakout Force:
The KX057-4 delivers an impressive bucket digging force of 11,177 lbs. Its powerful and well-balanced arm and bucket allow the operator to dig faster and more efficiently even in the toughest conditions.
Wider, More Comfortable Cabin:
The KX057-4 features a much wider door and ample foot space, making it a breeze to get on and off the excavator.
Two Speed Travel:
Placing the 2-speed travel switch on the dozer lever gives you more foot space, plus dozing operations can be done faster and easier.
Auto Shift:
Downshifting under load, the auto-shift system returns to high speed automatically, providing smoother turns and dozer work.
Wider Working Range:
A wide and powerful reach coupled with outstanding stability makes it possible to undertake a wider range of operations. The wide and powerful reach coupled with outstanding stability significantly reduces the need to shift position. The greater digging height means that operations—even from an elevated position—are handled with impressive efficiency.
5 Lower Track Rollers:
Travelling noise and vibration are reduced thanks to five lower track rollers. That helps reduce operator fatigue by the end of a long day.
Powerful Air Conditioning:
The overall air circulation in the cab has been improved, thanks to a stronger cooling/heating unit and the positioning of six vents around the operator to offer better all-round comfort.
Thumb Bracket and Relief Valve as Standard:
The hydraulic thumb makes short work of a variety of loading and material handling jobs. The factory installed mount brackets and hydraulics significantly reduce the time needed to mount accessories.
Key Features:
Kubota V2607-DI Engine:
The KX057-4 is powered by Kubota's impressive 47.6 HP direct injection engine. Engineered with the power to maximize digging and lifting performance, it also delivers minimized noise, vibration and fuel consumption.
Hydraulic Angle Blade (Option):
Save time and work more efficiently. With a simple movement of a rocker switch on top of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when backfilling trenches.
Auxiliary Circuit 1 (Standard Equipment):
Controlled by the right-hand joystick. AUX1 supplies 19.8 gpm to operate attachments requiring hydraulic flow, like a breaker, thumb, or tilt bucket.
AUX1 Diverter Valve:
With the AUX1 diverter valve, the AUX oil supply can be changed without having to remove the thumb pipeline when the operator wants to use a hydraulic attachment.
Auxiliary Circuit 2 (Optional):
With AUX2 installed the left-hand joystick supplies 19.8 gpm to operate attachment like a breaker, auger or tilt bucket. The right-hand joystick supplies 9.8 gpm to operate the hydraulic thumb.
Adjustable Maximum Oil Flow Control:
The maximum oil flow settings of both circuits are conveniently adjustable from the digital panel . No additional tools or complex manual adjusting procedures are necessary. You can even program up to five oil flow rates corresponding to specific attachments into memory on the digital panel.
Stronger Bucket and Arm Breakout Force:
The KX057-4 delivers an impressive bucket digging force of 11,177 lbs. Its powerful and well-balanced arm and bucket allow the operator to dig faster and more efficiently even in the toughest conditions.
Wider, More Comfortable Cabin:
The KX057-4 features a much wider door and ample foot space, making it a breeze to get on and off the excavator.
Two Speed Travel:
Placing the 2-speed travel switch on the dozer lever gives you more foot space, plus dozing operations can be done faster and easier.
Auto Shift:
Downshifting under load, the auto-shift system returns to high speed automatically, providing smoother turns and dozer work.
Wider Working Range:
A wide and powerful reach coupled with outstanding stability makes it possible to undertake a wider range of operations. The wide and powerful reach coupled with outstanding stability significantly reduces the need to shift position. The greater digging height means that operations—even from an elevated position—are handled with impressive efficiency.
5 Lower Track Rollers:
Travelling noise and vibration are reduced thanks to five lower track rollers. That helps reduce operator fatigue by the end of a long day.
Powerful Air Conditioning:
The overall air circulation in the cab has been improved, thanks to a stronger cooling/heating unit and the positioning of six vents around the operator to offer better all-round comfort.
Thumb Bracket and Relief Valve as Standard:
The hydraulic thumb makes short work of a variety of loading and material handling jobs. The factory installed mount brackets and hydraulics significantly reduce the time needed to mount accessories.
Kubota KX080-4 excavator delivers all the power you need while going easy on the environment thanks to new direct injection diesel engine with Common Rail System (CRS) and Diesel Particulate Filter (DPF) muffler, and a host of functions and equipment including ECO PLUS. Furthermore, its digging force is superior among 8-ton excavators.
Key Features:
Common Rail System and Diesel Particulate Filter (DPF) Muffler:
The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion. The results are great efficiency, better fuel economy and less engine noise. Its combination with the Exhaust Gas Recirculation (EGR) and Diesel Particulate Filter (DPF) Muffler reduces harmful emissions to make the KX080-4 Tier IV compliant.
Automatic Regeneration System:
Kubota’s original automatic regeneration system automatically burns accumulated particulate matter (soot) in the DPF muffler when the engine exceeds 1800 rpm to keep the muffler clean for longer operation. For safety reasons, automatic regeneration can be turned off with the inhibit switch when the excavator is operating in areas that are prone to fires.
Introducing ECO PLUS®:
Kubota’s original ECO PLUS® prioritizes fuel economy, and supports the environment. For tough digging applications, use Standard Mode and experience a 5% productivity improvement over the prior model and use less fuel, up to 12% less.
Proportional Flow Control of Auxiliary Circuits (AUX1/2) and Maximum Oil Flow Settings:
An auxiliary circuit (AUX2) comes standard on the KX080-4. The convenient thumb-operated switch allows easy proportional flow control of the auxiliary circuit, while a forefinger-operated on/off switch enables simple operation of special applications that require a constant oil flow. The maximum oil flow setting is conveniently adjustable from the digital panel. You can even program up to five oil flow rates corresponding to specific attachments so they can be quickly retrieved for the next job.
Adjustable Maximum Oil Flow Control for Auxiliary Port:
This unique function lets you control the oil flow and eliminates the hassle of using tools to change settings manually. The system will even store your settings for the next time you need it. Adjustable oil flow enhances performance and saves fuel.
Auto Idling System:
Save fuel with Kubota's Auto Idle. Reduce engine RPM instinctively when high engine speed isn’t needed. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs.
Hydraulic Angle Blade (option):
Save time and work more efficiently. With a simple movement of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when backfilling trenches.
Tight Tail Swing and Compact Machine Width:
Thanks to its contoured, tight tail design created by the shorter rear overhang, the KX080-4 has excellent stability, can handle a wider range of loads, and can work in more restrictive spaces. The compact 7’2.6” width of the under-carriage makes it ideal for working in close conditions, and much easier to transport between job sites.
Industrial Digging Force:
You need exceptional power when trenching through compacted soil. With the KX080-4, elevated productivity levels are certain with the combination of 14,660 lbs. bucket force and 8,554 lbs. arm forces. The KX080-4 powers through those demanding applications so that you can quickly move on to the next job.
Auto-Shift:
Now your excavator moves how you want it to–even at high speeds. When working with heavy loads, making turns or backfilling trenches, the system automatically downshifts for more torque. This shift is so smooth and seamless you’ll feel as though you’ve never left high speed.
3-pump Load-sensing Hydraulic System:
Kubota’s load-sensing hydraulic system guarantees smoother handling, regardless of load size. It allows hydraulic oil to flow according to your precise needs. The KX080-4’s new 3-pump load-sensing system also allows you to perform simultaneous operations, such as dozing and utilizing front attachments, without losing speed.
New Digital Panel:
Informative, interactive and functional, Kubota’s Intelligent Control System LCD panel accurately displays timely diagnostic readings and routine maintenance alerts. You’ll be kept informed of your current working conditions, engine RPM, temperature and oil levels. These new features help reduce downtime and costly repair fees.
Key Features:
Common Rail System and Diesel Particulate Filter (DPF) Muffler:
The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion. The results are great efficiency, better fuel economy and less engine noise. Its combination with the Exhaust Gas Recirculation (EGR) and Diesel Particulate Filter (DPF) Muffler reduces harmful emissions to make the KX080-4 Tier IV compliant.
Automatic Regeneration System:
Kubota’s original automatic regeneration system automatically burns accumulated particulate matter (soot) in the DPF muffler when the engine exceeds 1800 rpm to keep the muffler clean for longer operation. For safety reasons, automatic regeneration can be turned off with the inhibit switch when the excavator is operating in areas that are prone to fires.
Introducing ECO PLUS®:
Kubota’s original ECO PLUS® prioritizes fuel economy, and supports the environment. For tough digging applications, use Standard Mode and experience a 5% productivity improvement over the prior model and use less fuel, up to 12% less.
Proportional Flow Control of Auxiliary Circuits (AUX1/2) and Maximum Oil Flow Settings:
An auxiliary circuit (AUX2) comes standard on the KX080-4. The convenient thumb-operated switch allows easy proportional flow control of the auxiliary circuit, while a forefinger-operated on/off switch enables simple operation of special applications that require a constant oil flow. The maximum oil flow setting is conveniently adjustable from the digital panel. You can even program up to five oil flow rates corresponding to specific attachments so they can be quickly retrieved for the next job.
Adjustable Maximum Oil Flow Control for Auxiliary Port:
This unique function lets you control the oil flow and eliminates the hassle of using tools to change settings manually. The system will even store your settings for the next time you need it. Adjustable oil flow enhances performance and saves fuel.
Auto Idling System:
Save fuel with Kubota's Auto Idle. Reduce engine RPM instinctively when high engine speed isn’t needed. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs.
Hydraulic Angle Blade (option):
Save time and work more efficiently. With a simple movement of the dozer lever, the hydraulic angle blade can be angled to the right or left to push soil to the side as the machine moves forward, eliminating the need for repetitive repositioning at right angles when backfilling trenches.
Tight Tail Swing and Compact Machine Width:
Thanks to its contoured, tight tail design created by the shorter rear overhang, the KX080-4 has excellent stability, can handle a wider range of loads, and can work in more restrictive spaces. The compact 7’2.6” width of the under-carriage makes it ideal for working in close conditions, and much easier to transport between job sites.
Industrial Digging Force:
You need exceptional power when trenching through compacted soil. With the KX080-4, elevated productivity levels are certain with the combination of 14,660 lbs. bucket force and 8,554 lbs. arm forces. The KX080-4 powers through those demanding applications so that you can quickly move on to the next job.
Auto-Shift:
Now your excavator moves how you want it to–even at high speeds. When working with heavy loads, making turns or backfilling trenches, the system automatically downshifts for more torque. This shift is so smooth and seamless you’ll feel as though you’ve never left high speed.
3-pump Load-sensing Hydraulic System:
Kubota’s load-sensing hydraulic system guarantees smoother handling, regardless of load size. It allows hydraulic oil to flow according to your precise needs. The KX080-4’s new 3-pump load-sensing system also allows you to perform simultaneous operations, such as dozing and utilizing front attachments, without losing speed.
New Digital Panel:
Informative, interactive and functional, Kubota’s Intelligent Control System LCD panel accurately displays timely diagnostic readings and routine maintenance alerts. You’ll be kept informed of your current working conditions, engine RPM, temperature and oil levels. These new features help reduce downtime and costly repair fees.