HAY EQUIPMENT SPECIALS
2015 NEW HOLLAND 258 RAKE
TAG: N38786
TAG: N38786
New Holland Rolabar rakes are built for tough conditions, reliable operation and a long life. Set the standard for gentle, clean, smooth raking. Offset wheels are set close to the rake basket, allowing tines to follow the ground contour, dipping into low spots and rising over high ones to put more clean hay in the windrow.
Raking Width: 9'6", Overall Width: 11'
Steel Mounted Tines; Left Hand Delivery
Requires 30hp tractor; Drawbar Hitch
Call today for pricing and available finance options, or fill out an email request form.
Raking Width: 9'6", Overall Width: 11'
Steel Mounted Tines; Left Hand Delivery
Requires 30hp tractor; Drawbar Hitch
Call today for pricing and available finance options, or fill out an email request form.
2016 NEW HOLLAND HM234 DISCMOWER
TAG: N40706
The New Holland HM234 discmower slices cleanly through thick crops at high speed. Four oval cutting discs use two knives per disc to cut through wet grasses and break through nuisance fire ant hills and gopher mounds. Knives are made of high quality steel and are reversible for twice the cutting life. Rock guards and skid shoes protect the discs and carry the cutterbar over uneven ground.
Cutting Width: 5'6"; Cutting Height: 0.63-2.36"
Cutterbar: Enclosed gear drive
Number of Discs: 4; Knives per disc: 2; Disc Cutting Diameter: 20.47"
Minimum PTO hp Required: 35hp
Hitch: Cat. I or II
Width: 134.25"; Length: 54.33"; Height in transport position: 92.52"; Operating Weight: 822lbs
Call today for pricing and available finance options, or fill out an email request form.
Cutting Width: 5'6"; Cutting Height: 0.63-2.36"
Cutterbar: Enclosed gear drive
Number of Discs: 4; Knives per disc: 2; Disc Cutting Diameter: 20.47"
Minimum PTO hp Required: 35hp
Hitch: Cat. I or II
Width: 134.25"; Length: 54.33"; Height in transport position: 92.52"; Operating Weight: 822lbs
Call today for pricing and available finance options, or fill out an email request form.
|
|
|
|
2018 NEW HOLLAND PT3417 PROTED TEDDER
TAG: N43910
The New Holland PROTED™ 3417 tedder will help you make high-quality hay even in difficult weather conditions. This model is sized right for traditional haymakers using 9-10ft mowers and mower-conditioners. The convenient combined tine height and hydraulic folding systems automatically raise the tines when folded for transport; then the tines resume the preset working height when you reach the next field.
Tedding Width: 17' 1"; Number of Rotors: 4
Transport Width: 9' 6"; Transport Length: 8' 6"; Transport Height: 8' 8"; Weight: 904lbs
Hitch: Drawbar
Minimum Power Requirement: 20hp
Hydraulic Requirement: 1 single acting remote valve
Call today for pricing and available finance options, or fill out an email request form.
Tedding Width: 17' 1"; Number of Rotors: 4
Transport Width: 9' 6"; Transport Length: 8' 6"; Transport Height: 8' 8"; Weight: 904lbs
Hitch: Drawbar
Minimum Power Requirement: 20hp
Hydraulic Requirement: 1 single acting remote valve
Call today for pricing and available finance options, or fill out an email request form.
2017 NEW HOLLAND H7230 DISCBINE
Tag: N41680 (NEW; SET-UP REQUIRED)
The New Holland H7230 side-pull Discbine® disc mower-conditioners mow cleanly and smoothly through tough conditions. The classic and reliable MowMax cutterbar features the New Holland true modular design with ShockPRO™ disc drive hubs that absorb harmful impacts to protect the cutterbar drive from damage. Whether you’re mowing alfalfa, clover, orchard grass, timothy, grass, fescue, cereal rye, forage wheat or oats, Discbine H7000 hay mowers swiftly turn crop into fast-drying windrows or swaths.
Cut Width: 10' 4"
Discs: 8; Knives: 16 (2/disc)
Hydraulic Cutting Angle: 2-10°
Standard Cutting Height: 0.95-3.2"
Ground Clearance w/ fully raised header: 18"
Hookup: Drawbar
Requires minimum PTO output of 80hp
7' Swath; Adjustable 3'-7' windrow
Requires 2 remote hydraulic valves with 1500psi
Operating Speed: 0-9mph; Transport Speed: 20mph
Operating Width: 16'; Transport Width: 11' 3"
Operating Height: 4' 5"; Transport Height: 5' 8"
Operating Length: 17' 2"; Transport Length: 17' 7'
Weight: 4,165lbs
Call today for pricing and available finance options, or fill out an email request form.
Cut Width: 10' 4"
Discs: 8; Knives: 16 (2/disc)
Hydraulic Cutting Angle: 2-10°
Standard Cutting Height: 0.95-3.2"
Ground Clearance w/ fully raised header: 18"
Hookup: Drawbar
Requires minimum PTO output of 80hp
7' Swath; Adjustable 3'-7' windrow
Requires 2 remote hydraulic valves with 1500psi
Operating Speed: 0-9mph; Transport Speed: 20mph
Operating Width: 16'; Transport Width: 11' 3"
Operating Height: 4' 5"; Transport Height: 5' 8"
Operating Length: 17' 2"; Transport Length: 17' 7'
Weight: 4,165lbs
Call today for pricing and available finance options, or fill out an email request form.
KUHN FC 2860 TLR - RUBBER ROLL MOWER-CONDITIONER
TAG: N39492
The Kuhn FC 2860 TLR trailed, side-pull mower conditioner offers fast, clean mowing of heavy grasses and delicate forage crops combined with quick drydown from consistent, effective conditioning. These machines are the most advanced side-pull mower conditioners in the industry with the operational simplicity you want and the performance you demand for the maximum return on your investment.
The lubed-for life Optidisc® cutterbar with Fast-Fit blades provides unmatched simplicity and fast maintenance. The DiamondBlock® roller conditioner’s unique design gives more points for the crop to be crimped as it flows off the disc at an angle. Windrows can be varied from a narrow windrow to wide spreading over 75% of the cutting width to adapt to different harvest practices and field conditions. The rugged Gyrodine® swivel hitch makes sharp turns and square corners simple. The Constant Float® suspension system reduces the amount of missed crop in the field and helps keep dirt out of the harvested crop. All adjustments are quick and easy to keep the machine where it shines best – in the field laying down a quality crop.
Working width: 8'10"; Transport width: 8'10"
Number of discs with protecting skids: 6
Swath width (m): 0.9 - 2
Conditioning: Diamond block
Conditioning rotor speed (rpm): 760/1000
Swath width (feet): 3' - 6'8"
Weight (lb): 3500
Minimum power requirement for PTO (hp): 67
Tractor hydraulic equipment: 2 Double Acting
Call today for pricing and available finance options, or fill out an email request form.
The lubed-for life Optidisc® cutterbar with Fast-Fit blades provides unmatched simplicity and fast maintenance. The DiamondBlock® roller conditioner’s unique design gives more points for the crop to be crimped as it flows off the disc at an angle. Windrows can be varied from a narrow windrow to wide spreading over 75% of the cutting width to adapt to different harvest practices and field conditions. The rugged Gyrodine® swivel hitch makes sharp turns and square corners simple. The Constant Float® suspension system reduces the amount of missed crop in the field and helps keep dirt out of the harvested crop. All adjustments are quick and easy to keep the machine where it shines best – in the field laying down a quality crop.
Working width: 8'10"; Transport width: 8'10"
Number of discs with protecting skids: 6
Swath width (m): 0.9 - 2
Conditioning: Diamond block
Conditioning rotor speed (rpm): 760/1000
Swath width (feet): 3' - 6'8"
Weight (lb): 3500
Minimum power requirement for PTO (hp): 67
Tractor hydraulic equipment: 2 Double Acting
Call today for pricing and available finance options, or fill out an email request form.
2016 KUHN GA 4221 GTH TRAILED ROTARY RAKE
TAG: N39679
Kuhn 4221 GTH rotary rakes are designed to meet the needs of hay producers who demand higher productivity while they increase the quality of their hay and forage crops. Long, flexible tines touch the crop just once, lifting and depositing neatly into the windrow. This gentle raking action ensures that leaves remain intact. The large, well-formed windrows promote faster drying, enabling producers to harvest crops at their peak nutritional value with less reliance on the weather. Since the tines do not normally contact the soil, there is less opportunity for contaminants to enter the windrow, resulting in higher forage quality.
Hitch Type: Drawbar
Number of Tine Arms: 11; Number of Tines per Arm: 4
Transport Width: 6' 5"; Operating Width: 13' 5"
Machine Net Weight: 1,371lbs
Approx. Windrow Width: 4' 3"; Clean Swept Width: 9' 2"
Rotor Diameter: 10' 6"
Fully Enclosed Masterdrive double reduction gearbox
Wide Angle PTO Shaft
Minimum PTO power required: 30hp
Call today for pricing and available finance options, or fill out an email request form.
Hitch Type: Drawbar
Number of Tine Arms: 11; Number of Tines per Arm: 4
Transport Width: 6' 5"; Operating Width: 13' 5"
Machine Net Weight: 1,371lbs
Approx. Windrow Width: 4' 3"; Clean Swept Width: 9' 2"
Rotor Diameter: 10' 6"
Fully Enclosed Masterdrive double reduction gearbox
Wide Angle PTO Shaft
Minimum PTO power required: 30hp
Call today for pricing and available finance options, or fill out an email request form.
2017 KUHN GA 4220 TH TRAILED ROTARY RAKE
TAG: N42719
Saving time means reduced production costs. The KUHN GA 4220 TH gyrorake provides fast, efficient operation while maintaining high quality raking to maximize the nutrient value of your forage.
Hitch Type: Drawbar
Number of Tine Arms: 11; Number of Tines per Arm: 4
Transport Width: 11'; Operating Width: 13' 5"
Machine Net Weight: 1,290lbs
Approx. Windrow Width: 4' 3"; Clean Swept Width: 9' 2"
Rotor Diameter: 10' 6"
Hydraulic Rotor Lift: Standard
Fully Enclosed Masterdrive double reduction gearbox
Wide Angle PTO Shaft
Minimum PTO power required: 30hp
Call today for pricing and available finance options, or fill out an email request form.
Hitch Type: Drawbar
Number of Tine Arms: 11; Number of Tines per Arm: 4
Transport Width: 11'; Operating Width: 13' 5"
Machine Net Weight: 1,290lbs
Approx. Windrow Width: 4' 3"; Clean Swept Width: 9' 2"
Rotor Diameter: 10' 6"
Hydraulic Rotor Lift: Standard
Fully Enclosed Masterdrive double reduction gearbox
Wide Angle PTO Shaft
Minimum PTO power required: 30hp
Call today for pricing and available finance options, or fill out an email request form.
2017 KUHN GF 502 THA GYRO TEDDER
TAG: N42717
Tedding is a key link in the harvesting chain because it accelerates drying. The goal is simple: preserve the nutritional value of the crop and limit weather-related risks. The small-diameter KUHN rotors are crucial to a quality spread pattern. Small-diameter rotors do a better job of breaking up wet clumps for quicker drydown.
Hitch Type: Drawbar
Number of Rotors: 4; Number of Arms per Rotor: 6
Transport Width: 9' 4"; Operating Width: 16' 5"
Transport Height: 8' 8"
Weight: 1,005lbs
Minimum PTO power required: 20hp
Call today for pricing and available finance options, or fill out an email request form.
Hitch Type: Drawbar
Number of Rotors: 4; Number of Arms per Rotor: 6
Transport Width: 9' 4"; Operating Width: 16' 5"
Transport Height: 8' 8"
Weight: 1,005lbs
Minimum PTO power required: 20hp
Call today for pricing and available finance options, or fill out an email request form.
2017 KUHN PZ 170 DRUM MOWER
TAG: N42718
Designed to be reliable and simple to operate, the 5' 5" cutting width of the Kuhn PZ 170 provides small acreage landowners and hay producers with significantly improved capacity and productivity compared to sickle bar mowers. The PZ 170 cuts through tall, thick, tangled grasses with minimum horsepower requirements.
Transport Width: 55"; Operating Width: 65"
Hitch: Cat 1 & 2
# of Drums: 2; # Knives per Drum: 3
Cut Height Adjustment: Shims & Toplink
Fast Fit Blades: Standard; use the included tool to push the blade holder down and easily replace the blade
Weight: 838lbs
Minimum PTO Power Required: 27hp
Call today for pricing and available finance options, or fill out an email request form.
Transport Width: 55"; Operating Width: 65"
Hitch: Cat 1 & 2
# of Drums: 2; # Knives per Drum: 3
Cut Height Adjustment: Shims & Toplink
Fast Fit Blades: Standard; use the included tool to push the blade holder down and easily replace the blade
Weight: 838lbs
Minimum PTO Power Required: 27hp
Call today for pricing and available finance options, or fill out an email request form.
SITREX RT5200 & RT5200H ROTARY TEDDERS
RT5200 TAG: N42919 RT5200H TAG: N42918
The Sitrex tedder allows for a perfect and even spreading of forage. Tines pick up a small quantity of forage on every turn of the rotor and lay it on the ground perfectly aired without damage or dirt. Choose from the standard 4 rotor model or the hydraulic tedder version. The hydraulic version has a hydraulic lift system on the two outer rotors, making it easy for the operator to put the unit into working or transport mode.
Number of Rotors: 4; Number of Tines per Rotor: 6
Working Width: 17'; Transport Width: 10' 3"
R5200 Weight: 950lbs RT5200H Weight: 1000lbs
PTO Tractor Requirement: 25hp
PTO Slip Clutch: Standard
Operating Speed: 10mph
Call today for pricing and available finance options, or fill out an email request form.
Number of Rotors: 4; Number of Tines per Rotor: 6
Working Width: 17'; Transport Width: 10' 3"
R5200 Weight: 950lbs RT5200H Weight: 1000lbs
PTO Tractor Requirement: 25hp
PTO Slip Clutch: Standard
Operating Speed: 10mph
Call today for pricing and available finance options, or fill out an email request form.
